Heat insulator ELEPHANT BRAND "STAY COOL" is a roll fiber glass insulator 3 and 6 inches thick. It is specially designed for housing purpose. The size is0.60*4.00meter.STAY COOL is good to put on the ceiling to prevent heat. It also helps economize energy. The installation is quick and easy.
STAY COOL Installation Procedures
1. STAY COOL should be held and moved horizontally by holding both ends of the roll. Don’t pull the bag which cover the roll for it will damage thr roll.
2. Use the cutter to cut the bag to the width of the roll and push the roll forward (as shown in picture) and stir the roll to loosen the tense and then roll it back. Use the tape to stick at both end of the roll.
3. Lay STAY COOL on the ceiling by push forward. If the string holding the ceiling obstructs the roll, cut the roll to go beside the string. During the installation, use a long stick to help push the
roll to cover the area. If the roll is torn during the installation ,use the tape or foil to put it together.
Suggestions
1. The ELEPHANT BRAND insulator should stored on a smooth and dry place and the storage floor should be elevated 20-30cm.from the ground. The storage house should be roofed and good ventilation.
2. Don't pull the bag which cover the roll by hand for the bag will be torn apart and the insulates roll will be damaged
